Throttling | Search |
NowSMS Support Forums ⬆ NowSMS Support - SMS Issues ⬆ Archive through February 09, 2012 ⬆ |
◄ ► |
Author | Message | |||
Alex Kaiser Frequent Contributor Username: Alex_k Post Number: 240 Registered: 07-2006 |
Hi Des, Does RetryMultiplier parsameter affects on SMPPErrorThottleDelay? Regards, Alex K. | |||
Des - NowSMS Support Board Administrator Username: Desosms Post Number: 3519 Registered: 08-2008 |
Hi Alex, Not directly. The throttle delay is applied before any additional messages are submitted. No multiplier is ever applied to this SMPPErrorThrottleDelay period. The message that received the throttling error will be retried up to 5 times in succession. (When async mode is enabled, there may already be other messages that are in the transmit queue, so the message that received the throttling error is resubmitted to the end of the current async transmit queue.) If 5 successive throttling errors are received for a particular message, the message itself goes into a retry pending state, and additional retry delays are applied to this particular message at this stage. These delays can receive a multiplier effect. -- Des NowSMS Support | |||
Alex Kaiser Frequent Contributor Username: Alex_k Post Number: 241 Registered: 07-2006 |
Hi Des, Could you please tell how to set fixed throttle delay? Even if more than 5 retries occured. And how to set max retry attempts for throttling? Regards, Alex K. | |||
Des - NowSMS Support Board Administrator Username: Desosms Post Number: 3524 Registered: 08-2008 |
Hi Alex, There is a good description of the retry related parameters here: http://www.nowsms.com/sms-retry-error-handling-with-ucpemi-and-cimd RetryDelayMultiplier=0 will set a fixed retry delay period. There is some additional SMPP specific discussion here: http://www.nowsms.com/smpp-error-code-handling-in-nowsms Of particular note is this:
The article doesn't explain how these messages expire, since RetryMaxAttempts is ignored. There is an additional setting, RetryMaxAge, which is described here: http://support.nowsms.com/discus/messages/1/50832.html The Retry related parameters can be applied in the [SMSGW] section of SMSGW.INI to affect all connections, or in an SMSC specific section to apply only to a single connection. -- Des NowSMS Support |