Regarding OMA Provisioning Contents menu

Regarding OMA Provisioning Contents menu SearchSearch
Author Message
Johnny
New member
Username: Johny

Post Number: 46
Registered: 02-2009
Posted on Tuesday, November 04, 2014 - 08:51 am:   

Hi

I use Now SMS v2014005.30.

I have questions for OMA Provisioning Contents menu.

Could you change the Inbound/Outbound SMTP Encryption menu of OMA Provisioning Content?
Now, Inbound Mail Encryption and Outbound SMTP Encryption selection menu are None,SSL/TLS, STARTTLS.
Selection menu is three.
I want to change the menu None, SSL, TLS, STARTTLS.
Selection menu is four.
If it possible?



I input some datas in the E-mail Setting Section of OMA Provisioning Contents.
And then I select View XML.
At this time, <parm name="SERVICE" value="995"/>
995 is port number.
I know that service value have to input security type such SSL,TLS.
is it correct?

I want to change that SERVICE value input security type such as SSL, TLS not port number.

Now <parm name="SERVICE" value="995"/> ----> After changing <parm name="SERVICE" value="SSL"/>

can you change this?

Thanks


Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 5101
Registered: 08-2008
Posted on Tuesday, November 04, 2014 - 03:56 pm:   

Hi Johnny,

You can create your own XML documents in ay format that you like, and send them via "Send XML Settings". You do not have to use the XML generated by our forms.

It appears that we are using the standard SSL port number for POP3 as the "SERVICE" value for SSL/TLS, because that is what was documented in OTA provisioning documents from both Motorola and Nokia.

We might be able to change this, but it would help if you could confirm that you get the results you expect by sending the edited XML from "Send XML Settings".

--
Des
NowSMS Support
Johnny
New member
Username: Johny

Post Number: 47
Registered: 02-2009
Posted on Wednesday, November 05, 2014 - 09:08 am:   

Thank you for your support.

1. OMA Provisioning Content menu cannot be changed to select SSL, TLS separately? Our developer want to select SSL, TLS separately in the OMA Provisioning Content.

2. SERVICE" value cannot change from port number to security type in the OMA Provisioning Content?
Because OMA Provisioning Content menu obey Motorola and Nokia Document?

3. When I change "SERVICE" value from port number to security type, I use the Send XML Settings?

4. you said "We might be able to change this, but it would help if you could confirm that you get the results you expect by sending the edited XML from "Send XML Settings".
-> I can help you.

5. Send XML Settings obey Nokia/Ericsson Over The Air Settings specification.
but I have to test using the LGE handset.
When I send XML Settings to LGE mobile phone, mobile phone is not received.
Do you modify Send XML Settings menu so that XML Setting MSG is received to the LGE mobile phone.

Thanks
Johnny
New member
Username: Johny

Post Number: 48
Registered: 02-2009
Posted on Sunday, November 09, 2014 - 11:52 pm:   

Hi

Could you check above questions?

Thanks
Bryce Norwood - NowSMS Support
Board Administrator
Username: Bryce

Post Number: 8097
Registered: 10-2002
Posted on Monday, November 10, 2014 - 06:11 pm:   


quote:

1. OMA Provisioning Content menu cannot be changed to select SSL, TLS separately? Our developer want to select SSL, TLS separately in the OMA Provisioning Content.




You can create your own XML documents in ay format that you like, and send them via "Send XML Settings". You do not have to use the XML generated by our forms.

The form will NOT generate the XML that you request.


quote:

2. SERVICE" value cannot change from port number to security type in the OMA Provisioning Content?
Because OMA Provisioning Content menu obey Motorola and Nokia Document?




Correct.

If you refer to the OMA CP spec, there is no definition of SSL, TLS, STARTTLS as possible SERVICE values.

If you refer to section 4.6.4, you'll see:

The SERVICE parameter specifies which service is available behind this particular port number. Possible values are defined in the table below. The service can also be indicated by a well known port number being given as SERVICE. The format of this port number is as defined in PORTNBR. This parameter MUST be supported by the WAP client.
Service

Explanation
CL-WSPWAP connection-less session service
CO-WSPWAP session service
CL-SEC-WSPWAP secure connection-less session service
CO-SEC-WSPWAP secure session service
CO-SEC-WTAWAP WTA secure session service (over WSP)
CL-SEC-WTAWAP WTA secure connection-less session service (over WSP)
OTA-HTTP-TOOTA-HTTP service (push) TO-TCP [PushOTA]
OTA-HTTP-TLS-TOOTA-HTTP secure service (push) TO-TCP [PushOTA]
OTA-HTTP-POOTA-HTTP service (push) PO-TCP [PushOTA]
OTA-HTTP-TLS-POOTA-HTTP secure service (push) PO-TCP [PushOTA]


As you will see, STARTTLS is not even listed as an option. However, the Enabler Test Specification for Client Provisioning does show numerous examples using the STARTTLS value. (See http://technical.openmobilealliance.org/Technical/Release_Program/docs/ETS/OMA-ETS-ClientProvisioning-V1_1-20080421-C.pdf)

When SSL/TLS is used directly, section 4.6.4 applies, and the standard IANA secure port number for the protocol is used (993 for IMAP, 995 for POP3, 465 for SMTP).

Microsoft reference: http://msdn.microsoft.com/en-us/library/bb737695.aspx

Nokia and Motorola references are no longer on the web, but these registration documents originally provided by Nokia provide some insight.

text/plain110.txt
110.txt (5.9 k)
text/plain143.txt
143.txt (5.7 k)
text/plain25.txt
25.txt (5.7 k)


The use of the secure port number is consistent with the definition in 4.6.4 of the OMA CP spec at http://technical.openmobilealliance.org/Technical/Release_Program/docs/ClientProv/V1_1-20090728-A/OMA-WAP-TS-ProvCont-V1_1-20090728-A.pdf


quote:

3. When I change "SERVICE" value from port number to security type, I use the Send XML Settings?




If you want to use a "SERVICE" value other than described above, yes, that is the only option.


quote:

4. you said "We might be able to change this, but it would help if you could confirm that you get the results you expect by sending the edited XML from "Send XML Settings".
-> I can help you.

5. Send XML Settings obey Nokia/Ericsson Over The Air Settings specification.
but I have to test using the LGE handset.
When I send XML Settings to LGE mobile phone, mobile phone is not received.
Do you modify Send XML Settings menu so that XML Setting MSG is received to the LGE mobile phone.




Do you have a document that describes LGE expectations for the settings?

Can you send the settings correctly to LGE phone by changing only <parm name="SERVICE" value="SSL"/>

As Des stated, we can consider changing this. Current behavior is following the specifications, but admittedly the specifications are not clear and may not ave been interpreted the same way by other manufacturers.

-bn

Bryce Norwood
Now SMS/MMS Support