How to send SMS command by CMGC? | Search |
NowSMS Support Forums ⬆ NowSMS Support - SMS Issues ⬆ Archive through July 14, 2005 ⬆ |
◄ ► |
Author | Message | |||
Anonymous |
Plz help!I type via HyperTerminal: Example: For text mode: at+cmgf=1[enter] at+cmgc=2,0,0,0,"number"[enter] >4D43475300D135000000000000000000000000000000BEC4+<Ctrl+Z> ERROR For PDU mode: at+cmgf=0[enter] at+cmgc=<length> >PDU Text<enter>But I dont know how looks PDU Text in here Please write example in text and PDU mode how to send SMS command... Regards Vusal | |||
Bryce Norwood - NowSMS Support Board Administrator Username: Bryce Post Number: 4549 Registered: 10-2002 |
Hi, I'm sorry, but this is the support forum for the Now SMS/MMS Gateway product. I have to focus my time and attention on support matters related to our product, and I don't always have the time to respond to questions that do not involve our products. That said ... AT+CMGC ... I've never seen that command used before. That is an odd choice because that is for sending an SMS command instead of a regular SMS message. AT commands are documented in the ETSI GSM 07.05 specification, and PDU format is documented in ETSI GSM 03.40. Both of these specs can be downloaded from http://www.etsi.org. -bn |