Sms send using wavecomQ2403a | Search |
NowSMS Support Forums ⬆ NowSMS Support - SMS Issues ⬆ Archive through June 02, 2006 ⬆ |
◄ ► |
Author | Message | |||
laxmankumar New member Username: Glaxman Post Number: 1 Registered: 04-2006 |
i am using wavecom modem interface with pc uisng serial port and i want to send sms using hyperterminal. i am facing the problem +cms error:500 i am sending at+cnmi=0,1,1,1,0<enter> ok at+csmp=17,169,0,0 ok at+cmgf=1 ok at+csca="+1234567890" ok at+cmgs="9876543210" >hai slove my problem +cms error :500 how can i slove this problem. if i am dialed any number its working properly. | |||
Bryce Norwood - NowSMS Support Board Administrator Username: Bryce Post Number: 5857 Registered: 10-2002 |
Hi, This is the support forum for the Now SMS/MMS Gateway software product. I'm sorry, but I can't always provide assistance for questions that don't pertain to our products. "CMS ERROR: 500" means "unknown error". Unfortunately, most modems generate this error too often. In my experience, it frequently means that the modem does not have a signal. But it could also happen if you are entering a bogus AT+CSCA value (like the one in your example above). -bn |