Problem 2-way configuration

Problem 2-way configuration SearchSearch

SMS & MMS Technical Forum » NowSMS Support - SMS Issues (Product Support Only) » Archive through November 14, 2013 » Problem 2-way configuration « Previous || Next »
Author Message
Ahmed chaari
New member
Username: Stoner2008

Post Number: 3
Registered: 05-2013
Posted on Monday, May 27, 2013 - 02:54 pm:   

hi,
first of all i use a GSM modem as smsc (wavecom)
i followed the doc to configure my nowsms(2way)
http://www.nowsms.com/doc/2-way-sms-support
after sending my sms, i found my sms in my logs( smsin.log and smsout.log).
when i configured my 2way's now sms i did:
SMS Command Prefix: *
Command to Execute “c:\windows\system32\cmd.exe /c echo Echo @@FULLSMS@@“.
the problem here is that normally it should appear a message that echos the sms.but i have nothing.
i tried to put other commands to execute but it doesn't work as well.

please help me
Ahmed chaari
New member
Username: Stoner2008

Post Number: 5
Registered: 05-2013
Posted on Monday, May 27, 2013 - 03:24 pm:   

application/octet-streamsmsdebug log
SMSDEBUG.LOG (33.9 k)
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 4499
Registered: 08-2008
Posted on Tuesday, May 28, 2013 - 01:08 pm:   

Hi,

The SMSDEBUG.LOG indicates that there are no 2-way commands configured , or at least none that matched the inbound SMS.

If you defined the command prefix as *, it would match any inbound SMS. So I think for some reason the 2-way command definition was not saved.

Did you press the Apply button after defining the 2-way command?

Also, make sure that the quote characters (“) are not present in the command string. They will not cause the problem you are experiencing, but they will cause other problems.

Locate the SMSGW.INI file (usually in ProgramData\NowSMS). Does it have a ReceiveSMSCommand1= setting in the file? That would indicate the 2-way command setting was actually saved.

--
Des
NowSMS Support
Stoner2008
New member
Username: Stoner2008

Post Number: 6
Registered: 05-2013
Posted on Tuesday, May 28, 2013 - 01:43 pm:   

thank you for replying,
i'm using the nowsms v2012-06-28.
i'm uploading my 2 way configuration that you can help me to find the problem.(no quotes in the command)
2 way config

and here i post my SMSGW.INI
application/octet-streamsmsgw.ini
SMSGW.INI (0.6 k)


whatever i do the command is not executed
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 4502
Registered: 08-2008
Posted on Tuesday, May 28, 2013 - 01:49 pm:   

Hi,

I think I see the issue.

Leave the "Receive Phone Number" field blank, it is referring to the number of the modem that is receiving the message (to allow different commands for different modems).

--
Des
NowSMS Support
Stoner2008
New member
Username: Stoner2008

Post Number: 7
Registered: 05-2013
Posted on Tuesday, May 28, 2013 - 02:10 pm:   

i tried it but it didn't work
NB: i'm using the gsm modem wavecom.i started a java program that send sms.the sms is received in my logs(smsin and smsout) but the command is never shown.
i tried *.bat script, http command but it doesn't work
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 4503
Registered: 08-2008
Posted on Tuesday, May 28, 2013 - 03:04 pm:   

If indeed you have reset the "Receive Phone Number" field to be blank, then I would have to see updated versions of SMSDEBUG.LOG and SMSGW.INI to diagnose.

The previous files pointed to that setting being the problem.

If that setting has changed, then I'd expect to see something different in the log.

--
Des
NowSMS Support

Login Login / Register Logout Logout Search Last 30 Days Topics Topics