Wap Push DCS

Wap Push DCS SearchSearch

SMS & MMS Technical Forum » NowSMS Support - SMS Issues (Product Support Only) » Archive through November 14, 2013 » Wap Push DCS « Previous || Next »
Author Message
sam
Frequent Contributor
Username: Samdsouza

Post Number: 158
Registered: 08-2006
Posted on Tuesday, June 04, 2013 - 04:26 am:   

Hi Des

I was testing sending wap push messages using DCS=7 and DCS Value : 8 but the smsout logs show DCS value as F5 for all wap push. I tried adding the SMPP setting for DCS and even tried sending a wap push via the HTTP get URL but DCS value doesnt change. Is the DCS value for Wap push hard coded in NowSMS?

Kindly let me know

Thanks
Sam
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 4527
Registered: 08-2008
Posted on Tuesday, June 04, 2013 - 07:37 pm:   

Hi Sam,

DCS and PID override values are not supported for WAP Push or Settings messages submitted via the web.

NowSMS is hard coded to use a value of F5.

There is a configuration setting that allows a different value to be used. It is described here: http://www.nowsms.com/wap-push-att-usa-gsm-modem

Note that those settings are new, however BinaryDCS is an older name for the PushDCS setting, and it has been around for a long time.

Generally speaking, this is not a setting that requires dynamic adjustment.

Devices are unlikely to be able to properly understand the settings if a value other than F5 or 4 is used for DCS. F5 is preferred, but some systems block what they consider to be unusual values. (A few older SMPP servers require all 8-bit binary messages to have a DCS value of 2, but that is accomplished with a connection specific override.)

If you want to experiment with different values, copy and paste the messages from the SMSOUT log to resubmit as binary messages with a different DCS value.

--
Des
NowSMS Support
sam
Frequent Contributor
Username: Samdsouza

Post Number: 161
Registered: 08-2006
Posted on Wednesday, June 05, 2013 - 05:22 am:   

Thanks Des...am able to change the DCS values...Thanks once again....

Login Login / Register Logout Logout Search Last 30 Days Topics Topics