| TP-UDH and 7bit Encoding |  Search
|
|
NowSMS Support Forums ⬆ NowSMS Support - SMS Issues ⬆ Archive through April 10, 2005 ⬆ |
◄ ► |
| Author | Message | |||
| Semon New member Username: Semon Post Number: 3 Registered: 03-2005 |
The doc 'GSM0340' says that if 7 bit data is used and the TP-UD-Header does not finish on a septet boundary then fill bits are inserted after the last Information Element Data octet to get an integral number of septets for the entire TP-UD header. Does that mean we also have to code the TP-UD-Header as 7 bit data?(sounds impossible, because there may be binary octets in the header) E.g: A Concatenated Short Message User Data Header '050003990201', there are 6*8 bits. shall we add one bit or one byte to make an integral number of septets? Best Regards semon | |||
| Bryce Norwood - NowSMS Support Board Administrator Username: Bryce Post Number: 4238 Registered: 10-2002 |
This is a brief reply, as this is the product support forum for the Now SMS/MMS Gateway product, and I have to concentrate my efforts on answering support questions for our product. That said, I would answer 1 bit. But it is probably best illustrated with an example. http://support.nowsms.com/discus/messages/1/3274.html | |||
