MMS Is So Slow

MMS Is So Slow SearchSearch
Author Message
Abas Mohamed
New member
Username: Bigdongol

Post Number: 14
Registered: 02-2009
Posted on Monday, May 04, 2009 - 04:46 pm:   

Hi Des

Wish you Are ok, and remember me, today i have a strange problem that is the MMS is so so slow, i try to send MMS via VASP and already add MMSC Routing and when i try to send the standard URL (127.0.0.1:8000xxxxxx)
my Message went to MMS Prroccessed(user)
and sometime it increase MMS sent(vasp) and deleivered by me, and sometime increase MMS sent(MMSC) and doesnt deliverd by me
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 737
Registered: 08-2008
Posted on Monday, May 04, 2009 - 08:58 pm:   

Hi Abas,

It sounds like some messages are being sent out directly by the MMSC, which is not what works in your environment.

To make sure that this does NOT happen, check the following:

1.) The "MMSC Users" list should be empty. Any phone numbers listed here will receive MMS messages from NowSMS with NowSMS acting as the MMSC. This would be a problem in your environment.

2.) On the "MMSC Routing" page, make sure that the outbound route to your operator MMSC is defined as the "Default Route".

--
Des
NowSMS Support
Abas Mohamed
New member
Username: Bigdongol

Post Number: 15
Registered: 02-2009
Posted on Sunday, May 10, 2009 - 12:57 pm:   

Hi Des

Sorry for late in my reply,...

for point 1 and 2 i already mked them as default and the users is empty, but i don't know why it's happens with me..

also there's strange problem occure with me that i have 2 MMS account one of them are compataible with nowsms and the other can't send from it, i don't know why too??

and there's another things i wanna to know if i want to use multi recipints, this is depends on nowsms or depend on service provider availblity .

and also for CC, BCC if i want to use it in my link
http://127.0.0.1:8800/?PhoneNumber=xxxxxx&MMSFrom=sender@domain&MMSSubject=Message+Subject&MMSText=An+optional+text+part+of+the+message& MMSFile=http://www.nowsms.com/media/logo.gif

how could i can use it??

Thanks Alot DES and waiting You So SOooOn
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 763
Registered: 08-2008
Posted on Monday, May 11, 2009 - 03:26 pm:   


quote:

for point 1 and 2 i already mked them as default and the users is empty, but i don't know why it's happens with me..




The default route should always be used ... unless on of the following conditions is met:

1.) a recipient address is found in the "MMSC Users" list

2.) another "MMSC Routing" definition exists and the recipient address matches a wildcard defined in the "Route recipient" parameter of that route.


quote:

and there's another things i wanna to know if i want to use multi recipints, this is depends on nowsms or depend on service provider availblity .




It can depend a little on the provider.

Providers may limit the number of recipients per message.

By default, if you are using a modem, and you send to multiple recipients, NowSMS will break a message into separate messages if it is sent to more than 5 recipients. So if you send a message to 12 recipients, NowSMS will send to the first 5, then the next 5, then the final 2.

Your provider might support more ... or less ... recipients per message.

If you want to experiment with this setting, there is a special INI file setting. In the VASPOUT\routename\VASP.INI file, under the [VASP] header, you can specify MaxRecips=### , where ### is the max number of recipients per message supported by your mobile operator.


quote:

and also for CC, BCC if i want to use it in my link
http://127.0.0.1:8800/?PhoneNumber=xxxxxx&MMSFrom=sender@domain&MMSSubject=Messa ge+Subject&MMSText=An+optional+text+part+of+the+message& MMSFile=http://www.nowsms.com/media/logo.gif




The NowSMS URL interface does not support CC/BCC.

It is supported when submitting via MM7, but unfortunately not by the URL interface.

--
Des
NowSMS Support
Abas Mohamed
New member
Username: Bigdongol

Post Number: 16
Registered: 02-2009
Posted on Wednesday, May 13, 2009 - 08:33 pm:   

Welcome Back Des,

I'm waiting you for long time..

First, Thanks for you reply within every points i ask, and let me explain you more briefly

1) About MMSC Routing

1.) a recipient address is found in the "MMSC Users" list
for that point i dont have MMSC Users

2.) another "MMSC Routing" definition exists and the recipient address matches a wildcard defined in the "Route recipient" parameter of that route.
for that point i didn't understand as i really have three MMS account and defines already in MMSC Routing

2) For The Multi recipints i enter the path you specify and i din't found what you are talking about, Could i add this statement, and if it's not exist as now, has it default value ?? i see it always out 10 only per once!!

3) thanks for that information (The NowSMS URL interface does not support CC/BCC. ) i already use MM7 but within URL

thanks Des and waiting you
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 786
Registered: 08-2008
Posted on Thursday, May 14, 2009 - 01:18 am:   

1-2.) If you need further assistance on this issue, you need to tell me all of the routes defined, and all of the recipient address masks for these routes.

2.) If the value is not present, the default is used. That default is 5 for an MM1 connection in the current version of NowSMS, but maybe it was 10 in another version of NowSMS.

--
Des
NowSMS Support
Abas Mohamed
New member
Username: Bigdongol

Post Number: 17
Registered: 02-2009
Posted on Saturday, May 16, 2009 - 04:50 pm:   

for first point i'll told you all MMS account i have and may be you could found some thing like error or another thing in my routing MMSC Tab..

But for point 2 i use MM7 in sending MMS and so i found it's out only 10 MMS/Once and if i change that value as you told me it doesn't out and i notice another strange thing, some thing my Output MMS doesn't out and go to Outbound SMS Queue counter and failed to out, and some times out correctly, could you found a solution for that

Thanks again Des
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 809
Registered: 08-2008
Posted on Monday, May 18, 2009 - 03:19 pm:   


quote:

for first point i'll told you all MMS account i have and may be you could found some thing like error or another thing in my routing MMSC Tab.




If you have given me this info somewhere else, I do not know where it is.

MM7 defaults to 100 recipients per MMS in NowSMS, although your provider may not allow so many.

In your case, it may be necessary to define a MaxRecips=#### parameter with a lower number because your provider has a low limit to the number of recipients per MMS.

I do not know why NowSMS is trying to send MMS messages with NowSMS as the MMSC, instead of using the "Default Route".

I can only suggest what I have suggested before:

1.) The "MMSC Users" list should be empty.

2.) The "Default Route" on the "MMSC Routing" page should be your MM7 connection.

3.) Delete any other routes on the "MMSC Routing" page so that there is not confusion.

--
Des
NowSMS Support
Abas Mohamed
New member
Username: Bigdongol

Post Number: 18
Registered: 02-2009
Posted on Monday, May 18, 2009 - 05:41 pm:   

I think you are right about the maximum available MMS Our per MMS account from provider as i think they limits it to 10 only ..

But what is this means?? if i send for example to 15 Person, 10 person will submitted and 5 faild or all the 15 failed!!!

Also, for your point

3.) Delete any other routes on the "MMSC Routing" page so that there is not confusion.

what do you means by that point, as in MMSC Routing i Define 3 MMS Account, So what do you means by delete other routes?? and if there's a confusion how i could notice it !!!
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 821
Registered: 08-2008
Posted on Thursday, May 21, 2009 - 07:18 pm:   


quote:

But what is this means?? if i send for example to 15 Person, 10 person will submitted and 5 faild or all the 15 failed!!!




It depends on your provider.

The MM7 protocol has an error response for indicating that the provider only supports 1 recipient at a time. If NowSMS gets that error response, then it automatically reconfigures the connection to send to one recipient at a time. That is error code 3003, if memory serves me correctly.

However, I am not aware of any error condition that could allow a server to report an error of too many recipients. I suppose code 1100, partial success, could be used. However, in such a situation, I don't see how an informative reply that specifies a recipient limit could be returned.

Anyway ... what happens will depend on your provider. You can apply the configuration setting I mentioned earlier to have NowSMS automatically break messages to larger number of recipients into separate message submissions.

Unfortunately, you would need to experiment to find the best configuration answer.


quote:

3.) Delete any other routes on the "MMSC Routing" page so that there is not confusion.

what do you means by that point, as in MMSC Routing i Define 3 MMS Account, So what do you means by delete other routes?? and if there's a confusion how i could notice it !!!




I mean that you have indicated that messages are going through different routes where sometimes the recipient gets the message, and sometimes they do not.

I cannot see your configuration, so I do not know why this is happening.

So I am telling you to simplify. Get the simple configuration with one route working reliably. Then, add another route, get it working properly.

If you want my help, you need to tell me details about how these different routes are configured.

Tell me what the recipient address masks are for the different routes.

Screen shots (images) of the "MMSC Routing" page, and each of the routes below that page (just edit sensitive account names/usernames) would be helpful.

I would also like to see the MMSC-yyyymmdd.LOG. This would show me where messages to different recipients are being routed.

Then, you would tell me the messages to which recipients are not working.

With that information, I could help.

With the information here, I can only make guesses that may or may not apply to your configuration.

--
Des
NowSMS Support