Error 692 from RASDial

Error 692 from RASDial SearchSearch
Author Message
Christine
New member
Username: Pinkclp

Post Number: 1
Registered: 02-2010
Posted on Monday, February 22, 2010 - 06:57 am:   

I'm using Windows standard modem to connect to a Wavecom Modem. Speed setting is at 57600. After setting up everything I tested the SMSC is working fine. However MMSC is not working properly.

13:45:46:319 [C34] InitTAPI: Performing TAPI initialisation
13:45:58:967 [C34] InitTAPI: Returning cached TAPI session information
13:46:02:132 [C34] GetCIDForAPN: Standard 56000 bps Modem
13:46:02:132 [C34] GetCIDForAPN: digimms
13:46:02:132 [C34] GetCIDForAPN: AT+CGDCONT=?
13:46:02:232 [C34] GetCIDForAPN:
+CGDCONT: (1-4),"IP",,,(0-1),(0-1)
+CGDCONT: (1-4),"PPP",,,0,0

OK

13:46:02:232 [C34] GetCIDForAPN: minCID = 1, maxCID = 4
13:46:02:232 [C34] GetCIDForAPN: AT+CGDCONT?
13:46:02:332 [C34] GetCIDForAPN:
+CGDCONT: 1,"IP","cMNET",,0,0

+CGDCONT: 2,"IP","digimms",,0,0

OK

13:46:02:332 [C34] GetCIDForAPN: Found CID=2 for APN digimms
13:46:02:412 [C34] InitTAPI: Returning cached TAPI session information
13:46:04:014 [C34] GetCIDForAPN: Standard 56000 bps Modem
13:46:04:014 [C34] GetCIDForAPN: digimms
13:46:04:014 [C34] GetCIDForAPN: AT+CGDCONT=?
13:46:04:104 [C34] GetCIDForAPN:
+CGDCONT: (1-4),"IP",,,(0-1),(0-1)
+CGDCONT: (1-4),"PPP",,,0,0

OK

13:46:04:104 [C34] GetCIDForAPN: minCID = 1, maxCID = 4
13:46:04:104 [C34] GetCIDForAPN: AT+CGDCONT?
13:46:04:205 [C34] GetCIDForAPN:
+CGDCONT: 1,"IP","cMNET",,0,0

+CGDCONT: 2,"IP","digimms",,0,0

OK

13:46:04:205 [C34] GetCIDForAPN: Found CID=2 for APN digimms
13:46:04:205 [C34] WSPRasDial: Before RasDial NowSMS - Standard 56000 bps Modem
13:46:13:358 [C34] WSPRasDial: Error 692 (2B4) from RasDial
13:46:13:358 [C34] WSPRasDial: Closing connection
14:43:48:937 [C34] InitTAPI: Returning cached TAPI session information
14:43:53:183 [C34] GetCIDForAPN: Standard 56000 bps Modem
14:43:53:183 [C34] GetCIDForAPN: digimms
14:43:53:183 [C34] GetCIDForAPN: AT+CGDCONT=?
14:43:53:283 [C34] GetCIDForAPN:
+CGDCONT: (1-4),"IP",,,(0-1),(0-1)
+CGDCONT: (1-4),"PPP",,,0,0

OK

14:43:53:283 [C34] GetCIDForAPN: minCID = 1, maxCID = 4
14:43:53:283 [C34] GetCIDForAPN: AT+CGDCONT?
14:43:53:383 [C34] GetCIDForAPN:
+CGDCONT: 1,"IP","cMNET",,0,0

+CGDCONT: 2,"IP","digimms",,0,0

OK

14:43:53:383 [C34] GetCIDForAPN: Found CID=2 for APN digimms
14:43:53:403 [C34] InitTAPI: Returning cached TAPI session information
14:43:55:126 [C34] GetCIDForAPN: Standard 56000 bps Modem
14:43:55:126 [C34] GetCIDForAPN: digimms
14:43:55:126 [C34] GetCIDForAPN: AT+CGDCONT=?
14:43:55:226 [C34] GetCIDForAPN:
+CGDCONT: (1-4),"IP",,,(0-1),(0-1)
+CGDCONT: (1-4),"PPP",,,0,0

OK

14:43:55:226 [C34] GetCIDForAPN: minCID = 1, maxCID = 4
14:43:55:226 [C34] GetCIDForAPN: AT+CGDCONT?
14:43:55:326 [C34] GetCIDForAPN:
+CGDCONT: 1,"IP","cMNET",,0,0

+CGDCONT: 2,"IP","digimms",,0,0

OK

14:43:55:326 [C34] GetCIDForAPN: Found CID=2 for APN digimms
14:43:55:326 [C34] WSPRasDial: Before RasDial NowSMS - Standard 56000 bps Modem
14:44:03:468 [C34] WSPRasDial: Error 692 (2B4) from RasDial
14:44:03:468 [C34] WSPRasDial: Closing connection
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 1829
Registered: 08-2008
Posted on Monday, February 22, 2010 - 05:17 pm:   

Hi Christine,

I would suggest using the 33600 bps driver instead of 56000. It won't limit your speed ... the problem is that the 56000 drivers tend to send extra AT commands for modem compression techniques that are specific to land-line modems.

The 692 error means a hardware failure on the port or modem. I have seen this happen before with the 56000 driver, because the modem does not understand these land-line specific AT commands.

--
Des
NowSMS Support