Singapore singtel mms settings

Singapore singtel mms settings SearchSearch
Author Message
Rafael W
Unregistered guest
Posted on Wednesday, November 10, 2004 - 03:15 am:   

hi,
i would like to know the mms settings if im using singtel

currently, im using the nokia 6220 and connected to pc using the dku-5 cable

im able to send sms using the nowsms but i cant send mms

thx
Bryce Norwood - NowSMS Support
Board Administrator
Username: Bryce

Post Number: 3741
Registered: 10-2002
Posted on Thursday, November 11, 2004 - 08:57 pm:   

According to my information, the following are the settings for Singtel:

APN: e-ideas
User ID: 65eideas
Password: eideas
WAP Gateway IP: 165.21.42.84
MMS Server URL: mms.e-ideas.com.sg:10021/mmsc


You need to go into the "MMSC Routing" page in NowSMS, and add a route using MM1 over your GSM/GPRS modem.

The basic configuration is outlined at the following link:

http://www.nowsms.com/documentation/ProductDocumentation/mms_notifications_and_c ontent/Connecting_to_operator_MMSC.htm#SendingMMSMessages

Based upon these settings, you would configure the following:

You will define an account under the "MMSC Routing" page, and then make that the default route.

"Account name" and "Account Description" can be set to any value as they are used only internally by NowSMS.

"Default Sender Address" should be left blank.

"Allow sender address override" should NOT be checked.

"Route messages to this account ..." can be left blank (as long as you make this the default route).

"Route messages to VASP via" should be "MM1".

"Server Address" should be "mms.e-ideas.com.sg:10021/mmsc". (It is not a problem to include the "http://" in the URL, but that is not required.)

"Login Name" and "Password" should be blank.

"Use specific Network connection (GPRS Modem)" should be checked.

"Network Connection" should be set to "Modem: name of your modem driver".

"WAP Gateway IP Address" should be "165.21.42.84".

"Modem Used" should be "name of your modem driver".

"GPRS APN" should be "e-ideas".

"Login Name" should be "65eideas" and "Password" should be "eideas". (Note: There are two different login name/password fields on the page. The first one, under the "Server Address" field, needs to be blank.)

Press "Test Connection" to test your settings. (Note: This test only verifies that the GPRS APN and WAP Gateway IP address settings are accessible. It does not test the MMS Server URL setting which can only be tested by actually sending a message.)