We want to build a perfect system through mass nowsms

We want to build a perfect system through mass nowsms SearchSearch
Author Message
New member
Username: Tanzi090

Post Number: 2
Registered: 08-2015
Posted on Monday, August 17, 2015 - 10:57 pm:   

There is a need to ask the question :
1 ) in the same WiFi network environment , all 10 phones installed APK, can connect to the mowsmslite job?
2 ) Is there a control panel , which controls 10 phones at the same time send a multimedia message ?
3 ) can control each phone to send MMS speed?
4 ) I once submitted 10,000 phone numbers, respectively, by 10 mobile phones to send this can be done automatically assigned ? ʱ??
5) web pages can access it outside the network ?

Engineers expect to help me set up a reliable system of mass , thank you
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 5404
Registered: 08-2008
Posted on Tuesday, August 18, 2015 - 06:01 pm:   


1. Yes, but not with NowSMS Lite. The "Lite" version can only talk to one modem.

The full Now SMS/MMS Gateway supports adding connections to multiple Android devices and/or service providers.

It is licensed either based on throughput (Gateway Edition), or based upon number of modems. More description of the product editions can be found here: http://www.nowsms.com/new-nowsms-product-editions

The trial version of Now SMS/MMS Gateway will support 10 modems (Android devices), but limit overall throughput to around 30 messages per minute.

Contact our sales department for pricing info: http://www.nowsms.com/contact

3. There are advanced settings, but they are a little difficult to find. For SMS, there is an SMSCSendLimit setting that can be applied in SMSGW.INI. For MMS, each modem has a separate VASP.INI settings file where a SendLimit setting can impose a max speed. Do a text search on SendLimit in this document: http://www.nowsms.com/doc/advanced-configuration-settings/ini-file-settings

4. By default, messages are processed in the order submitted, to the first available modem/connection.

5. If firewalls/network connectivity/IP restrictions allow.

NowSMS Support
Robert G.
New member
Username: Rbgcode

Post Number: 15
Registered: 02-2015
Posted on Thursday, September 17, 2015 - 06:05 pm:   

@Des Not to hijack this thread but to your support BBS systems allow PM's? I was going to PM you incase my respone to this thread was not allowed but I was going to check if it was ok to post

@gaoxin - I have setup mass MMS/SMS systems with this software utilizing load balancers and almost any type of configuration you can think of. If you get hung up anywhere please let me know and I will see what I can do to help. I really enjoy deploying large scale systems like this.
Des - NowSMS Support
Board Administrator
Username: Desosms

Post Number: 5455
Registered: 08-2008
Posted on Friday, September 18, 2015 - 08:32 pm:   

Hi Robert, we don't have PM enabled. I wish we could, but the forum software we use is a bit old and out-of-date.

@gaoxin, if you wish to be put in touch with Robert directly, please email nowsms@nowsms.com with Attention: Des in the subject line, and I will forward your details.

Alternatively, feel free to discuss in public posts here.

NowSMS Support