Point to Point protocol and IP and PORT

Point to Point protocol and IP and PORT SearchSearch
Author Message
New member
Username: Glaxman

Post Number: 2
Registered: 04-2006
Posted on Wednesday, May 03, 2006 - 09:50 am:   

hello i want to send data to the IP=61.1152.159 with port number 9090 .how can initialize the gprs modem to this IP and Port address using the AT commands.
Bryce Norwood - NowSMS Support
Board Administrator
Username: Bryce

Post Number: 5871
Registered: 10-2002
Posted on Wednesday, May 03, 2006 - 07:56 pm:   


This is the support forum for the Now SMS/MMS Gateway software product. I'm sorry, but I don't have a great deal of time to offer general programming advice.

I will tell you that you cannot do what you want to do with AT commands alone. Generally speaking in GPRS, you use the AT+CGDCONT command to define which APN you are connecting to. Then you use ATD*99***x# to connect to the APN. At that point, you don't use AT commands any more ... you begin a PPP negotiation to start an IP session.

salem al salem
New member
Username: Smoke2

Post Number: 1
Registered: 05-2006
Posted on Monday, May 22, 2006 - 11:01 am:   

plz help me i need play internet in my mobile is samsungE700}