How to send SMS command by CMGC?

How to send SMS command by CMGC? SearchSearch

SMS & MMS Technical Forum » NowSMS Support - SMS Issues (Product Support Only) » Archive through July 14, 2005 » How to send SMS command by CMGC? « Previous || Next »
Author Message
Anonymous
 
Posted on Wednesday, May 11, 2005 - 09:39 am:   

Plz help!I type via HyperTerminal:
Example:
For text mode:
at+cmgf=1[enter]
at+cmgc=2,0,0,0,"number"[enter]
>4D43475300D135000000000000000000000000000000BEC4+<Ctrl+Z>
ERROR:-(
For PDU mode:
at+cmgf=0[enter]
at+cmgc=<length>
>PDU Text<enter>But I dont know how looks PDU Text in here:-(
Please write example in text and PDU mode how to send SMS command...
Regards Vusal
Bryce Norwood - NowSMS Support
Board Administrator
Username: Bryce

Post Number: 4549
Registered: 10-2002
Posted on Wednesday, May 18, 2005 - 09:13 pm:   

Hi,

I'm sorry, but this is the support forum for the Now SMS/MMS Gateway product.

I have to focus my time and attention on support matters related to our product, and I don't always have the time to respond to questions that do not involve our products.

That said ... AT+CMGC ... I've never seen that command used before. That is an odd choice because that is for sending an SMS command instead of a regular SMS message.

AT commands are documented in the ETSI GSM 07.05 specification, and PDU format is documented in ETSI GSM 03.40. Both of these specs can be downloaded from http://www.etsi.org.

-bn

Login Login / Register Logout Logout Search Last 30 Days Topics Topics