HTTP Requests to SMPP 3.4 | Search |
NowSMS Support Forums ⬆ MMS & SMS Technical Discussions (unsupported) ⬆ |
◄ ► |
Author | Message | |||
yusuff ahamad syed New member Username: Syedyusuff Post Number: 1 Registered: 03-2013 |
Can nowSMS able to convert HTTP POST requests to SMPP3.4 and SMPP 3.4 requests to HTTP GET requests? We are using SAS application which can only send and receive HTTP requests. We need SMSC gateway which can convert HTTP to SMPP3.4 and vice versa. | |||
Des - NowSMS Support Board Administrator Username: Desosms Post Number: 4347 Registered: 08-2008 |
Hi, Yes, that is possible. Here are the basics of what you will need to configure. First, on the SMSC configuration, add an SMPP SMSC with your SMPP connection details. Start the SMS service and verify that you can send SMS messages from the web interface. To submit SMS messages directly from HTTP requests, the HTTP parameters are described at the following page: http://www.nowsms.com/doc/submitting-sms-messages/url-parameters Note that while the examples described at that link are HTTP GET, the same parameters can be used with HTTP POST using a standard form request of application/x-www-form-urlencoded. Messages that are received back from the SMPP SMSC will be routed to the 2-way SMS processor, which is described at http://www.nowsms.com/doc/2-way-sms-support You can configure the SMS to be forwarded via 2-way SMS to any HTTP URL that you configure. Parameters are normally passed via HTTP GET. If you want to use HTTP POST instead, use a URL prefix of httppost:// for your URL command instead of http:// -- Des NowSMS Support |