RE:MMS Sending Failure | Search |
NowSMS Support Forums ⬆ MMS & SMS Technical Discussions (unsupported) ⬆ Archive through November 21, 2009 ⬆ |
◄ ► |
Author | Message | |||
muniraja.bs New member Username: Muniraj Post Number: 1 Registered: 03-2009 |
Hi sir, I am Muniraj From bangalore working as Application Engineer,I am using a Sagem Hilo Gsm/GPRS develeopment kit,I want to send a MMS from the sim inserted in the kit but it is giving error,actually i am using a MMSCOMP from now mms to generate a testfle.mms,and i am sending this MMS bin file through serial port,to sagem Hilo module and sending the mms from there,but the problem when i configured Hilo Module with MMS AT commands and start sending the MMS file it is giving an CME ERROR:31,and not sending MMS. When I try to send the MMS from Mobile to Mobile it is going,even I contacted the Tech support of my service provider they told they allready enebled the MMS configuration in my mobile. but when i try to send the MMS from my development kit it is giving a problem and showing error 31,I am giving the AT commands for the MMS sending below please have look and sugest me what is wrong with this,even i tried config the module with AT+CGCONDT=1,"IP","mms" and ATD*99***1# thruogh Hyper terminal it is connecting to GPRS,please Help to How to sort out this issue, i am attaching the MMS sending AT commands bellow at OK at+creg?+CREG: 0,1 OK at+cgreg?+CGREG: 0,1 OK at+kcnxcfg=0,"GPRS","airtelgprs.com" OK at+kmmcnf=0,1 OK at+kmmcnf=1,"http://100.001.201.171:10021/mmsc" OK at+kmmcnf=3,"airtelmms.com","","","100.001.201.172",0 OK at+kmmcnf=4,1 OK at+kmmcnf?+KMMCNF: 0,1 +KMMCNF: 1,"http://100.001.201.171:10021/mmsc" +KMMCNF: 3,"airtelmms.com","","","100.1.201.172",0 +KMMCNF: 4,1 OK at+kpsd=,"MMS","ALL"OK at+kpsd=,"MMS","ALL"+CME ERROR: 3 at+kpsw="MMS",71506CONNECT NO CARRIER +KPSW: "4D4D5300000000000010" at+kpssend="4D4D530000000000002010" +CME ERROR: 31 Thanks Muniraj | |||
Des - NowSMS Support Board Administrator Username: Desosms Post Number: 554 Registered: 08-2008 |
Hi Muniraj, Those commands are Sagem specific, so I don't have any experience using them. Maybe someone else will come along with some ideas for you. I was curious, so I did download their API specification for a quick look. It might just be a typo in your message here, but the value you are passing to AT+KPSSEND does not match the message id returned from AT+KPSW. Beyond that, I don't have any suggestions, as that's the first time I've ever seen that Sagem specific API. -- Des NowSMS Support | |||
Des - NowSMS Support Board Administrator Username: Desosms Post Number: 555 Registered: 08-2008 |
Actually ... I do have one other suggestion. Get rid of the the leading 0's in your IP addresses. E.g., instead of 100.001.201.171, use 100.1.201.171. I have experienced APIs in the past that get very confused by leading 0's in an IP address, and interpret the address incorrectly. -- Des NowSMS Support |