| Cannot conect modem |  Search
|
|
NowSMS Support Forums ⬆ NowSMS Support - SMS Issues ⬆ Archive through April 10, 2005 ⬆ |
◄ ► |
| Author | Message | |||
| Andrei Albu Unregistered guest |
I am trying with a Nokia 3100 on port COM2, and I receive the error: "modem not connected". It worked fine with Siemens MC60. The Nokia IS connected. The Nokia soft works well. What shall I do? | |||
| Andrei Albu Unregistered guest |
I forgot: i use it with DKU-5 Cable | |||
| Bryce Norwood - NowSMS Support Board Administrator Username: Bryce Post Number: 4006 Registered: 10-2002 |
You receive the error "modem not connected" from what software? That is not a NowSMS error message that I am aware of. That said, I'm not sure if the Nokia 3100 has GSM modem capability. But here's a general tip ... Make sure that you have exited Nokia PC Suite. It might be running minimised and have a tray icon only. If you do not exit Nokia PC Suite, then that software may have the modem port open so that no other software will be able to communicate with it. | |||
| Andrei Albu Unregistered guest |
Thanks Bryce. Indeed, 3100 dosn't support NMO. So I am trying with a 6110i. I succeded once, but during the night it ran out of battery. I reinstalled the DKU driver, it's on COM3. I didn't installed PC Suite again and it is not working. "Unable to access modem, ensure that it is powered" | |||
| Bryce Norwood - NowSMS Support Board Administrator Username: Bryce Post Number: 4040 Registered: 10-2002 |
Hi Andrei, Can you connect to the modem using HyperTerminal on that port? In Hyperterminal, you should be able to type ATZ and press Enter ... and get an OK response back. To check if a modem supports the SMS command set, you can also issue: AT+CSMS=0 AT+CMGF=0 And both of those should return OK if the SMS command set is supported. -bn | |||
| Amar Manche New member Username: Amarmanche Post Number: 2 Registered: 02-2005 |
i m using Nokia 6600 to send sms from PC using USB data cable using COM4 port, its giving Error 50 : No response from Modem using activexperts.com application. plz help me its urgent | |||
| Aditya Unregistered guest |
Hi, I am using a Motorola V555 as a GSM modem and it is working properly in windows. When I try to add the modem to the NowSMS Gateway, I receive an error (attached) stating that "Modem does not support SMS -- Error" Do I need to use a different phone? Is there something I can do (or something I'm not doing) to get around or through this problem? Thanks. | |||
| Bryce Norwood - NowSMS Support Board Administrator Username: Bryce Post Number: 4253 Registered: 10-2002 |
The error mesasge "Modem does not support SMS" indicates that the device is a modem, but it does not support the AT commands for sending/receiving SMS. If you want to confirm this, I'd repeat the advice above. Connect to the modem using HyperTerminal on that port. In Hyperterminal, you should be able to type ATZ and press Enter ... and get an OK response back. To check if a modem supports the SMS command set, you can also issue: AT+CSMS=0 AT+CMGF=0 Both of those should return OK if the SMS command set is supported. Here's a discussion thread about phones that will function as modems: http://support.nowsms.com/discus/messages/1/4218.html | |||
